Fixed & hinged guards
Folded sheet or mesh guards over belts, chains, couplings and cutters, bolted on or hinged with tool-release fasteners.
Home / Products / Machine guards
Machine guards and enclosures, made to the machine in front of you.
Fixed and hinged guards, mesh enclosures, belt and chain covers, nip-point guards and interlock-ready doors fabricated to fit the machinery you already run. Stainless for food plants, powder-coated steel or aluminium for the workshop floor.
The range
Guarding that suits the machine, not the other way round.
Catalogue guarding rarely fits an older machine or a home-built line. We measure the hazard, the access the operator needs and the switches your safety consultant specifies, then build to that.
Mesh enclosures
Framed mesh panels and doors around robots, presses and packaging lines, with interlock cut-outs and gates.
Conveyor & nip guards
Roller, pulley and nip-point guards for conveyors, with lift-off sections for maintenance.
Stainless food-plant guards
Hygienic guarding with sloped tops and open frames that hose down.
Indicative pricing
Indicative machine guard pricing.
Indicative range only. Size, material, mesh versus sheet, hinges and interlock provisions all move the price.
Custom machine guard
From a single belt cover to a framed mesh enclosure with doors.
$450from, + GST
Single guards $450–$2,000; enclosures $3,000–$15,000 + GST
- Measured and made to your machine
- Stainless, aluminium or powder-coated steel
- Tool-release fasteners or interlocked doors
- Fitted on site where needed
We fabricate to your or your safety consultant's guarding spec; the risk assessment and interlock design remain with you.
Questions
Common questions about machine guards and safety enclosures.
Do you do the guarding assessment?
No. A safety consultant or your own health and safety person identifies the hazards and the guarding standard. We turn that into steel that fits and works.
Can you fit guards to old machinery?
Yes. Older machines with no guarding at all are the usual job. We measure on site and build guards that use existing bolt holes where possible.
Mesh or solid?
Mesh keeps the machine visible and cool; solid sheet contains swarf, coolant and noise. Most enclosures use both, with solid panels where things fly and mesh where operators need to see.
How it works
Spec, quote, fabricate, fit.
01
Spec
We confirm size, materials, the loadings or spec and how it will be used.
02
Quote
It is all priced before any steel is cut, so there are no surprises.
03
Fabricate
Built in the Patumahoe workshop to the agreed spec.
04
Fit
Delivered, fitted or installed and checked over before handover.
Also built here
Other things the workshop makes.
Steel stairs
Mono-stringer, twin-stringer and external steel stairs for houses, decks and mezzanines.
ViewStructural steel
Beams, posts, lintels and brackets for renovations, decks and pergolas, made to the engineer's drawings.
ViewAccess ramps
Permanent and modular aluminium wheelchair ramps with handrails and non-slip decking.
ViewGot a job in mind? Let’s talk it through.
Send through photos, rough measurements and how it’ll be used — we’ll come back with a practical next step and a price.