Carcasses & frames
Welded stainless base units cut for a built-in barbecue, fridge, sink and drawers, ready to clad in stone, tile, brick or timber.
Home / Products / Outdoor kitchens
Outdoor kitchens that do not rust out in three summers.
Stainless carcasses, benchtops, doors and drawers for outdoor kitchens and BBQ areas, built around the built-in barbecue, fridge, sink and burners you have already chosen. In 316 for coastal sites, so the frame lasts as long as the house.
The range
The frame is the part that fails.
Most outdoor kitchens are built from treated timber or a powder-coated steel frame that quietly corrodes behind the cladding. A welded stainless carcass does not, and it can be clad in whatever you like afterwards.
Benchtops & splashbacks
Seamless stainless benchtops with an integrated sink, drainer and upstand, and splashbacks cut around the burner.
Doors, drawers & bins
Stainless doors, drawer stacks, bin pull-outs and gas-bottle housings that keep working after a wet winter.
Islands & servery units
Free-standing outdoor islands and servery benches with an overhang for stools and a covered storage end.
Indicative pricing
Indicative outdoor kitchen pricing.
Indicative range only. Length, number of appliance cut-outs, doors and drawers, 304 versus 316 and the benchtop spec all move the price. Appliances, cladding and stonework are not included.
Custom outdoor kitchen
From a single BBQ cabinet to a full L-shaped run with sink and fridge.
$4,500from, + GST
Typically $4,500–$18,000 + GST depending on length and spec
- 316 stainless carcass, fully welded
- Cut to your barbecue, fridge and sink
- Stainless benchtop and splashback to match
- Delivered and set in place locally
We build the metalwork. Appliances, stone, tiling and gas connection are arranged by you or your builder — we work to their dimensions.
Questions
Common questions about stainless steel outdoor kitchens and BBQ cabinetry.
Do you supply the barbecue and fridge?
No. You choose the appliances and we build the cabinetry around their exact cut-out dimensions and ventilation requirements. Send us the spec sheets and we work from those.
Can it be clad in stone or tile?
Yes. The stainless carcass is designed as the structure, with a substrate or batten fixing so your builder, tiler or stonemason can clad it. Or leave it as bare brushed stainless.
Is 316 worth the extra?
Within a few kilometres of the coast, yes. 304 will tea-stain in salt air. Inland and under a roof, 304 is normally fine and we will tell you which one your site needs.
Do you install it?
We deliver and set the unit in place across Franklin and Auckland. Gas, water and electrical connection are done by your registered tradespeople.
How it works
Spec, quote, fabricate, fit.
01
Spec
We confirm size, materials, the loadings or spec and how it will be used.
02
Quote
It is all priced before any steel is cut, so there are no surprises.
03
Fabricate
Built in the Patumahoe workshop to the agreed spec.
04
Fit
Delivered, fitted or installed and checked over before handover.
Also built here
Other things the workshop makes.
Rock sliders & side steps
Chassis-mounted rock sliders, side steps and rails, welded to fit your ute or 4WD.
ViewStainless benches
Commercial kitchen and workshop benches, welded and polished to fit your space.
ViewStainless benchtops
Seamless residential kitchen and scullery benchtops with welded sink bowls.
ViewGot a job in mind? Let’s talk it through.
Send through photos, rough measurements and how it’ll be used — we’ll come back with a practical next step and a price.