Cooktop splashbacks
Single panels behind a hob, sized to the cabinetry with folded edges and a rangehood cut-out.
Stainless splashbacks, cut and folded to size.
The simplest way to get a wipe-down, heat-proof wall behind a cooktop or a commercial cook line. We fold the edges, cut around power points and rangehoods, and deliver a panel that fits first time.
The range
From a single cooktop panel to a full cook line.
Splashbacks are laser-cut or guillotined, folded on the press brake for a clean return edge, then finished and protected for fitting.
Full-wall kitchen splashbacks
Bench-to-cupboard panels around a whole kitchen, joined with tidy overlaps or welded seams.
Commercial wall cladding
Floor-to-ceiling wall sheets for commercial kitchens, wash-up areas and food plants, ready for hygiene inspections.
Indicative pricing
Indicative splashback pricing.
Indicative range only. Final pricing depends on size, finish, the number of cut-outs and whether we fit it.
Custom stainless splashback
Supplied ready to fit, or fitted by us.
$400from, + GST
Typically $400–$2,500 + GST depending on size and finish
- 304 stainless, brushed, satin or mirror
- Folded return edges for a finished look
- Cut-outs for outlets and rangehoods
- Protective film left on until fitted
Roughly $350–$500 per square metre cut, folded and supplied; mirror finish and fitting are extra.
Questions
Common questions about stainless steel splashbacks.
How is a stainless splashback fixed to the wall?
Panels are glued with a neutral-cure silicone or construction adhesive onto a flat, sealed wall, with folded edges so no raw sheet edge is visible. No visible screws.
What finish hides marks best?
A brushed or satin finish hides fingerprints and wipe marks. Mirror finish looks great but shows everything, so it is best kept away from the cooktop itself.
Can I supply my own measurements?
Yes. Send a sketch with wall dimensions and the positions of power points and the rangehood. For full-kitchen jobs we prefer to template on site.
How it works
Spec, quote, fabricate, fit.
01
Spec
We confirm size, materials, the loadings or spec and how it will be used.
02
Quote
It is all priced before any steel is cut, so there are no surprises.
03
Fabricate
Built in the Patumahoe workshop to the agreed spec.
04
Fit
Delivered, fitted or installed and checked over before handover.
Also built here
Other things the workshop makes.
Sinks & wash troughs
Pot-wash sinks, sink benches, hand basins and long wash troughs, welded to spec.
ViewExtraction hoods
Wall and island canopies in 304 stainless, welded to suit your ducting and filters.
ViewShelving & racks
Wall shelves, overshelves, gantries and coolroom shelving made to length.
ViewGot a job in mind? Let’s talk it through.
Send through photos, rough measurements and how it’ll be used — we’ll come back with a practical next step and a price.