Sink benches
Single or double bowl benches with left, right or double drainers and a splashback upstand.
The range
Bowls, drainers and troughs made to spec.
Standard sinks come in standard sizes. When the space, the pots or the compliance rules do not fit those sizes, we build the sink around them.
Pot-wash sinks
Deep, heavy-gauge bowls for commercial pot washing, with pre-rinse tap plates and waste positions to suit.
Hand basins & cleaner's sinks
Wall-hung hand-wash basins and bucket sinks for compliant food premises and workshops.
Wash troughs
Long troughs for dairy sheds, vege washing, schools and industrial wash-down areas.
Indicative pricing
Indicative sink & trough pricing.
Indicative range only. Final pricing depends on bowl count and depth, overall length, drainer layout, gauge and fittings.
Custom stainless sink or trough
From a wall-hung hand basin to a triple-bowl pot-wash bench.
$1,400from, + GST
Typically $1,400–$8,000 + GST depending on size and bowls
- Welded and polished bowls, no joins
- Drainer grooves and splashback to suit
- Waste, overflow and tap holes cut to your fittings
- Adjustable legs or wall brackets
Wall-hung hand basins start from around $600; long troughs and heavy pot-wash sinks sit at the upper end.
Questions
Common questions about stainless steel sinks and wash troughs.
How deep can you make a pot-wash sink?
Bowls up to around 400 mm deep are common for commercial pot washing, in 1.5 mm stainless so they stay rigid. Deeper is possible for specific equipment.
Do you supply the taps and wastes?
We cut the holes to suit the tapware and wastes you or your plumber specify. We can supply standard stainless wastes and basket strainers if you prefer.
Can a sink be built into an existing bench?
Often, yes. We can make a drop-in sink section, or replace the top of an existing frame with a new welded top including the bowls.
How it works
Spec, quote, fabricate, fit.
01
Spec
We confirm size, materials, the loadings or spec and how it will be used.
02
Quote
It is all priced before any steel is cut, so there are no surprises.
03
Fabricate
Built in the Patumahoe workshop to the agreed spec.
04
Fit
Delivered, fitted or installed and checked over before handover.
Also built here
Other things the workshop makes.
Extraction hoods
Wall and island canopies in 304 stainless, welded to suit your ducting and filters.
ViewShelving & racks
Wall shelves, overshelves, gantries and coolroom shelving made to length.
ViewTrolleys & stands
Tray racks, tub trolleys, equipment stands and mobile benches on the right castors.
ViewGot a job in mind? Let’s talk it through.
Send through photos, rough measurements and how it’ll be used — we’ll come back with a practical next step and a price.