Under-tray boxes
Boxes that hang under a flat-deck tray, with drop-down or side-opening doors and drain holes.
The range
Boxes for tradies, farmers and fleets.
The box is built around what goes in it and where it sits on the ute, so drawers open past the wheel arch and the lid clears the canopy.
Cross-deck & gullwing boxes
Full-width boxes behind the cab, opening from one or both sides, with divided storage.
Side & wheel-arch boxes
Full-length side boxes that follow the tray and clear the wheel arch.
Drawer systems
Roller-bearing drawer boxes for tools and parts that need to stay in order.
Indicative pricing
Indicative toolbox pricing.
Indicative range only. Final pricing depends on size, door style, drawers, locks and whether we fit it.
Custom aluminium toolbox
Built to measure and fitted to the ute.
$1,200from, + GST
Typically $1,200–$5,000 + GST depending on size and drawers
- Aluminium checker plate, fully welded
- Stainless T-handle locks and piano hinges
- Rubber seals and gas struts
- Fitted to your tray or supplied loose
Drawer systems, dual-key locking and powder coating sit at the upper end.
Questions
Common questions about aluminium ute toolboxes.
Are the boxes waterproof?
They are weather-sealed: fully seam welded with a rubber lid seal and drip channels, which keeps rain and road spray out in normal use. No box is fully submersible.
Can you match my existing tray or canopy?
Yes. We build to the space between the headboard, the wheel arch and the tray edge, so the box sits flush and the doors clear everything around them.
Do you fit them?
Yes. Boxes are bolted to the tray with backing plates and sealed. Fitting is usually done the same day as pickup.
How it works
Spec, quote, fabricate, fit.
01
Spec
We confirm size, materials, the loadings or spec and how it will be used.
02
Quote
It is all priced before any steel is cut, so there are no surprises.
03
Fabricate
Built in the Patumahoe workshop to the agreed spec.
04
Fit
Delivered, fitted or installed and checked over before handover.
Also built here
Other things the workshop makes.
Got a job in mind? Let’s talk it through.
Send through photos, rough measurements and how it’ll be used — we’ll come back with a practical next step and a price.